Nexmosphere - IX-DM6 | DMX control
Product information "Nexmosphere - IX-DM6 | DMX control"
The DMX interface is designed to control a single DMX512 universe, allowing multiple daisy-chained lighting fixtures to be controlled through one interface. Typically, this feature is used to add DMX lighting to interactive installations, allowing lighting effects to respond intelligently to sensor input. This document provides an explanation of the available functionalities and instructions on how to install and integrate the interface into your digital signage installation.
The information in this document is created for users who are familiar with the Nexmosphere API and are able to control a basic setup with a Nexmosphere API controller. If this is not the case yet, please read the general documentation on the Nexmosphere serial API first.
PACKAGE CONTENTS: Nexmosphere - IX-DM6 | DMX control
| Protocol: | RS 485 |
|---|---|
| Usage / Type: | Light |
Features
- Direct ramps - of 4 DMX channels
- Define states - of up to 6 DMX channels
- State transitions - with a settable ramp time
- Define Master scenes - of up to 48 DMX channels (only on IX-DM6)
- Scene transitions - with a settable ramp time (only on IX-DM6)
Specifications
Product overview: The IX DMX Interface is available in 2 models:
| IX-DM3 | IX-DM6 | |
|---|---|---|
| Control one DMX512 universe | ✔ | ✔ |
| Direct ramps of 4 channels | ✔ | ✔ |
| Transition between 4-channel states | ✔ | ✔ |
| Transition between 6-channel states | ✖ | ✔ |
| Transition between 48-channel scenes | ✖ | ✔ |
The DMX interface is housed inside a 3-pin female XLR connector. It can be connected to a DMX fixture via an industrystandard 3-pin XLR cable. The DMX interface can control one DMX512 universe. Multiple DMX interfaces can be connected to a Nexmosphere controller to control multiple DMX universes.