MOXA - NPort 6450
4-port RS-232/422/485 to Ethernet secure serial port server
Listepris:
5.058,55 kr.*
Forhandlerpris - Login
4 stykker til rådighed, leveringstid: 2 - 3 arbejdsdage
Producentens varenummer:
NPort 6450
Vores artikelnummer:
10805
Har du spørgsmål? Vi vil med glæde rådgive dig! → Kontaktformular
Produktinformation "MOXA - NPort 6450"
The NPort® 6000 is a terminal server that uses the SSL and SSH protocols to transmit encrypted serial data over Ethernet. Up to 32 serial devices of any type can be connected to the NPort® 6000, using the same IP address. The Ethernet port can be configured for a normal or secure TCP/IP connection. The NPort® 6000 secure device servers are the right choice for applications that use large numbers of serial devices packed into a small space. Security breaches are intolerable and the NPort® 6000 Series ensures data transmission integrity with support for DES, 3DES, and AES encryption algorithms. Serial devices of any type can be connected to the NPort® 6000, and each serial port on the NPort® 6000 can be configured independently for RS-232, RS-422, or RS-485 transmission.
Scope of delivery: MOXA - NPort 6450
Scope of delivery: MOXA - NPort 6450
| Connection: | 10 / 100-TX (RL45), Fiber Optic |
|---|---|
| Power Supply: | External |
| Protocol: | RS 232 / 422 / 485 |
| Serial Ports: | 4 Ports |
Features
No Data Loss If Ethernet Connection Fails
The NPort® 6000 is a reliable device server that provides users with secure serial-to-Ethernet data transmission and a customer-oriented hardware design. If the Ethernet connection fails, the NPort® 6000 will queue all serial data in its internal 64 KB port buffer. When the Ethernet connection is re-established, the NPort® 6000 will immediately release all data in the buffer in the order that it was received. Users can increase the port buffer size by installing an SD card.
LCD Panel Makes Configuration Easy
The NPort® 6600 has a built-in LCD panel for configuration. The panel displays the server name, serial number, and IP address, and any of the device server’s configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly.
Adjustable Resistor Values for RS-485 Communication
The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort® 6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.
No Data Loss If Ethernet Connection Fails
The NPort® 6000 is a reliable device server that provides users with secure serial-to-Ethernet data transmission and a customer-oriented hardware design. If the Ethernet connection fails, the NPort® 6000 will queue all serial data in its internal 64 KB port buffer. When the Ethernet connection is re-established, the NPort® 6000 will immediately release all data in the buffer in the order that it was received. Users can increase the port buffer size by installing an SD card.
LCD Panel Makes Configuration Easy
The NPort® 6600 has a built-in LCD panel for configuration. The panel displays the server name, serial number, and IP address, and any of the device server’s configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly.
Adjustable Resistor Values for RS-485 Communication
The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort® 6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.
Technical details
Memory
SD Slot: Up to 32 GB (SD 2.0 compatible)
Input/Output Interface
Alarm Contact Channels: Resistive load: 1 A @ 24 VDC
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector): 1, Auto MDI/MDI-X connection
Magnetic Isolation Protection: 1.5 kV (built-in)
Compatible Modules: NM Series expansion modules for optional extension of RJ45 and fiber Ethernet ports
Optical Fiber
Ethernet Software Features
Configuration Options: Web Console (HTTP/HTTPS), Windows Utility, Device Search Utility (DSU), MCC Tool, Serial Console, Telnet/SSH Console
Management: ARP, BOOTP, DHCP Client, DNS, HTTP, ICMP, IPv4/IPv6, PPPOE, SMTP, SNMPv1/v2c/v3, SNTP, TCP/IP, Telnet, UDP
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY Drivers: Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers: SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X, macOS 10.12, macOS 10.13, macOS 10.14, macOS 10.15
Android API: Android 3.1.x and later
MIB: MIB-II
Time Management: SNTP Client
Unicast Routing: RIPV1/V2, Static Route
Security Functions
Authentication: Local database
RADIUS: TACACS+
Encryption: HTTPS, AES-128, AES-256, HMAC, RSA-1024, SHA-1, SHA-256, SHA-384
Security Protocols: HTTPS (TLS 1.2), SNMPv3, SSHv2
Serial Interface
Connector: DB9 male
No. of Ports: 4
Serial Standards: RS-232, RS-422, RS-485
Secure Operation Modes: Reverse SSH, Secure Pair Connection, Secure Real COM, Secure TCP Client, Secure TCP Server, SSH
Standard Operation Modes: Disabled, Ethernet Modem, Pair Connection, PPP, Printer, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, Terminal, UDP
Baudrate: 50 bps to 921.6 kbps (supports non-standard baudrates)
Console Port: Serial port 1: RS-232 (19200, n, 8, 1)
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR, XON/XOFF
Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control: ADDC® (automatic data direction control)
Terminator for RS-485: 120 ohms
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Power Parameters
Input Current: 730 mA @ 12 VDC
Input Voltage: 12 to 48 VDC
Reliability
Automatic Reboot Trigger: Built-in WDT
Alert Tools: Built-in buzzer and RTC (real-time clock)
Physical Characteristics
Housing: Metal
Dimensions (with ears): 181 x 103 x 35 mm (7.13 x 4.06 x 1.38 in)
Dimensions (without ears): 158 x 103 x 35 mm (6.22 x 4.06 x 1.38 in)
Weight: 1020 g (2.25 lb)
Interactive Interface
LCD panel display: Push buttons for configuration
Installation: Desktop, DIN-rail mounting (with optional kit), Wall mounting
Environmental Limits
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature (package included): -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Memory
SD Slot: Up to 32 GB (SD 2.0 compatible)
Input/Output Interface
Alarm Contact Channels: Resistive load: 1 A @ 24 VDC
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector): 1, Auto MDI/MDI-X connection
Magnetic Isolation Protection: 1.5 kV (built-in)
Compatible Modules: NM Series expansion modules for optional extension of RJ45 and fiber Ethernet ports
Optical Fiber
Ethernet Software Features
Configuration Options: Web Console (HTTP/HTTPS), Windows Utility, Device Search Utility (DSU), MCC Tool, Serial Console, Telnet/SSH Console
Management: ARP, BOOTP, DHCP Client, DNS, HTTP, ICMP, IPv4/IPv6, PPPOE, SMTP, SNMPv1/v2c/v3, SNTP, TCP/IP, Telnet, UDP
Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY Drivers: Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers: SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X, macOS 10.12, macOS 10.13, macOS 10.14, macOS 10.15
Android API: Android 3.1.x and later
MIB: MIB-II
Time Management: SNTP Client
Unicast Routing: RIPV1/V2, Static Route
Security Functions
Authentication: Local database
RADIUS: TACACS+
Encryption: HTTPS, AES-128, AES-256, HMAC, RSA-1024, SHA-1, SHA-256, SHA-384
Security Protocols: HTTPS (TLS 1.2), SNMPv3, SSHv2
Serial Interface
Connector: DB9 male
No. of Ports: 4
Serial Standards: RS-232, RS-422, RS-485
Secure Operation Modes: Reverse SSH, Secure Pair Connection, Secure Real COM, Secure TCP Client, Secure TCP Server, SSH
Standard Operation Modes: Disabled, Ethernet Modem, Pair Connection, PPP, Printer, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, Terminal, UDP
Baudrate: 50 bps to 921.6 kbps (supports non-standard baudrates)
Console Port: Serial port 1: RS-232 (19200, n, 8, 1)
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, DTR/DSR, XON/XOFF
Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control: ADDC® (automatic data direction control)
Terminator for RS-485: 120 ohms
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Power Parameters
Input Current: 730 mA @ 12 VDC
Input Voltage: 12 to 48 VDC
Reliability
Automatic Reboot Trigger: Built-in WDT
Alert Tools: Built-in buzzer and RTC (real-time clock)
Physical Characteristics
Housing: Metal
Dimensions (with ears): 181 x 103 x 35 mm (7.13 x 4.06 x 1.38 in)
Dimensions (without ears): 158 x 103 x 35 mm (6.22 x 4.06 x 1.38 in)
Weight: 1020 g (2.25 lb)
Interactive Interface
LCD panel display: Push buttons for configuration
Installation: Desktop, DIN-rail mounting (with optional kit), Wall mounting
Environmental Limits
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature (package included): -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Tilbehør
